A Series

Applications
All ’A’ Series valves are single seated, self-actuating, diaphragm type regulators. They are available in a wide range of designs and operating pressure ranges for a variety of applications with water, air, oil, gases or other non-corrosive fluids.

Pressure regulating valve for mobile homes

Features
This modified regulator is specially designed for mobile homes and recreational trailer installations where space limitations are important and relatively low capacity is required.

Applications
Types A-31 and A-31S pressure regulating valves are designed for installations where space and cost limitations are important in systems with initial pressures up to 300 psi. They are for use on water and air, suitable for drinking fountains, bubblers, water coolers, humidifiers, beer pumps, beverage dispensers, spray paint outfits, air tools, etc. Models A-31 and A-31S are suitable for other liquids and gases if recommended by the factory.

Compact and Economical Regulators

Features
Reduces high pressure to lower outlet pressure within close limits. The standard adjustment range is from 2 to 180 psi. Maximum operating temperature 180°F (82°C).

Applications
Cash Valve Types A-360, A-361 and A-362 pressure reducing regulating valves incorporate an aspirating action to give accurate regulation at high flow rates. Extreme fluctuations in the upstream or inlet pressure have little or no effect on the delivery or outlet pressure due to balanced design. Recommended for regulating the flow of air, oils, gases and all non-corrosive fluids. Not for use on steam.

Small commercial pressure regulating valves

Features
■ The A-360 and A-361 incorporate an aspirating action to give exceptionally good regulation at high flow rates. Maximum initial pressure, 400 psi. Maximum delivery pressure, 175 psi. Maximum temperature, 180° F (82°C).
■ Type A-360 has one inlet and one outlet; furnished with forged brass body.
■ Type A-361 is designed for 3-way or 4-way use. One inlet, three outlets. Gauge tappings 1/4" NPT; cast bronze body.
■ Type A-362 is a special modification of the A-360 for pressures up to 1,100 psi inlet, to 250 psi outlet. Sizes 1/4" and 3/8" only.