Float Type

Float type drains

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a solid state relay which in turn signals a solenoid valve to be energized. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the closing of the solenoid valve allowing NO AIR to escape

STANDARD FEATURES

  • Reliable operation
  • Low maintenance
  • Manual draining test switch
  • Solid state electronic control
  • Translucent reservoir
  • High Capacity

 

4444-H

Design Pressure:230 PSIG(15.8 Bar)
Reservoir Capacity:4 oz.(.118 Liter)
Condensate level:Non-Visible
Operated by:Pneumatics
Dimensions (WxDxH): 4.1'' x 6.0'' x 4.1''104mm x 152mm x 104mm
Fluid Temp (Min - Max):35°F - 180°F1°C - 82°C
Inlet Connection:1/2''NPT
Discharge Connection:1/4'' NPT
Weight:3lbs.1.3 kg
Valve type:Orifice

Suitable for unattended draining of compressed air filters, and other small pressure vessels.

Can be used in explosion-proof environment

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a mechanical switch which rises with the fluid level until its upper limit is reached. At this level, the mechanical switch opens the drain orifice. As the orifice opens, the line pressure forces the fluid in to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the mechanical switch to close the orifice which allows NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Pneumatic control
* Low Capacity
* No electricity required

 

Condensate Management320.23 KB 4488-H

4488-AM1

Design Pressure:200 PSIG(13.7 Bar)
Reservoir Capacity:21 oz(.621 Liter)
Condensate level:Visible
Electrical:115V-1PH-60HZ
Dimensions (WxDxH): 6'' x 8'' x 7.5''152mm x 203mm x 190mm
Fluid Temp (Min - Max):35°F - 180°F1°C - 82°C
Inlet Connection:1/2'' NPT
Discharge Connection:1/4'' NPT
Weight:11 lbs.4.9 kg
Valve type:Solenoid

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a solid state relay which in turn signals a solenoid valve to be energized. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the closing of the solenoid valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Manual draining test switch
* Solid state electronic control
* Translucent reservoir
* Medium Capacity

 

Condensate Management320.23 KB 4488-AM1

4488-AM2

Design Pressure:200 PSIG(13.7 Bar)
Reservoir Capacity:8 oz(.236 Liter)
Condensate level:Visible
Electrical:115V-1PH-60HZ
Dimensions (WxDxH): 3.5'' x 5.5'' x 7.5''89mm x 140mm x 190mm
Fluid Temp (Min - Max):35°F - 180°F1°C - 82°C
Inlet Connection:1/2'' NPT
Discharge Connection:1/4'' NPT
Weight:5 lbs.2.2 kg
Valve type:Solenoid

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a solid state relay which in turn signals a solenoid valve to be energized. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the closing of the solenoid valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Manual draining test switch
* Solid state electronic control
* Translucent reservoir
* Low Capacity

 

Condensate Management320.23 KB 4488-AM2

4488-C

Valve type:Solenoid
Electrical:115V-1PH-60HZ
Dimensions (WxDxH): 5.5'' x 8'' x 13.25''139mm x 203mm x 336mm
Fluid Temp (Min - Max):35°F - 180°F1°C - 82°C
Inlet Connection:1/2'' NPT
Discharge Connection:1/2'' NPT
Weight:15 lbs.6.8 kg
Condensate level:Visible
Reservoir Capacity:35 oz(1.0 Liter)
Design Pressure:200 PSIG(13.7 Bar)

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a solid state relay which in turn signals a solenoid valve to be energized. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the closing of the solenoid valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Manual draining test switch
* Solid state electronic control
* Translucent reservoir
* High Capacity

 

Condensate Management320.23 KB 4488-C

4488-R

Design Pressure:250 PSIG(17.2 Bar)
Reservoir Capacity:35 oz(1.0 Liter)
Condensate level:Visible
Operated by:Pneumatics
Dimensions (WxDxH): 13'' x 9'' x 8.5''330mm x228 x216
Fluid Temp (Min - Max):35°F - 180°F1°C - 82°C
Inlet Connection:3/4''NPT
Discharge Connection:1/2'' NPT
Weight:17 lbs.7.7 kg
Valve type:Full ported ball

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

Can be used in explosion-proof environment

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a pneumatic relay which in turn energizes a cylinder to open a ball valve. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the cylinder to close off the ball valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Pneumatic control
* Translucent reservoir
* High Capacity
* No Electricity required

 

Condensate Management320.23 KB

ADP-1

Design Pressure:120 PSIG(8.2 Bar)
Reservoir Capacity:24 oz(.709 Liter)
Condensate level:Visible
Operated by:Pneumatics
Dimensions (WxDxH): 14.5'' x 6.5'' x 6.5''368mm x 165 x 165
Fluid Temp (Min - Max):35°F - 150°F1°C - 65°C
Inlet Connection:3/4''NPT
Discharge Connection:1/2'' NPT
Weight:14lbs.6.3 kg
Valve type:Full ported ball

Suitable for unattended draining of compressed air dryers, aftercoolers, receivers and other pressure vessels.

Can be used in explosion-proof environment

NO AIR LOSS DRAIN
A stainless steel float assembly equipped with a magnetic reed switch rises with the fluid level until its upper limit is reached. At this level, the reed switch signals a pneumatic relay which in turn energizes a cylinder to open a ball valve. As the valve opens, the line pressure forces the fluid in the reservoir to exit. As the float lowers with the reservoir fluid level, a lower limit is reached causing the reed switch to signal the cylinder to close off the ball valve allowing NO AIR to escape

 

STANDARD FEATURES
* Reliable operation
* Low maintenance
* Pneumatic control
* Translucent reservoir
* High Capacity
* No Electricity required
* OPTIONAL FLUID HEATER AVAILABLE FOR SUB ZERO TEMPERATURES

 

Condensate Management320.23 KB ADP-1